Easy Case TK-3000 Series
Assembly Process & Advantages
 


Advantage 1:
Free service logo screen-printion on the
Removable 5.25" FDD cover






Step 1:
Tool-less opening front panel from the bottom<Fig.1>
Advantage 2:
Screw-less& wireless front panel: Snapping-on front panel no screws for front panel installation or even for face changing in the future, cable holder is fixed over the front metal.<Fig.2>




 

 

 Step 2:
Slide 2-piece-side-covers forward to the front bezel direction for opening.(Top cover opening is avaiable, please follow the opening direction of side-covers for top cover opening.)
Hand-opening for step 2,there are 2 additional holes left on the side-covers to fix screws upon it's necessary while the system assembling is done.<Fig.3 >
Advantage 3:
Tool-free design for 2 side-covers & top-cover to help time saving and to minimize defects.











Step 3: Fix the sliding-drive-rail well on the right and left side of CD-ROM in advance <See Fig.4>, and then slide the CD-ROM forward to the 5.25" FDD space.(You may use screws as an optional mean to fasten the 5.25: devices upon the bracket.)<Fig.5>
Advactage 4:
Sliding-drive-rail for all 4 x 5.25" FDD space, co-existing assembly fro "Drive Rail & Screw Bolt" on the 5.25" bracket. Customers even may install the components with screws upon upgrading in the future while losing the sliding rail.<See Fig.5A>

 

 

Step 4:
Detach the 3.5" bracket out of the case body firstly for fixing FDD/HDD individual, then clip the 3.5" bracket on uponFDD/HDD are assembled. No screws are needed. Two additional screws left (on the top-right and top-left side) to help the connection between 5.25" and 3.5" brackets for better dropping testion solution.<Fig.6 & 7>

Advantage 5:

  1. Detachable 3.5" bracket is to simplify the assembly and to help the maintenance in the future especially for bulk orders.
  2. Super Capacity for a Midi-Tower Case 9 Drive Spaces: 4 x 5.25" FDD + 2 x 3.5" FDD + 3 x 3.5" HDD < fig.7>. Under the pressure of unbelievable upgrading speed, the super-size capacity will bring another selling point.

 

 

 

 

 

 

 

 

 

Step 5:

  1. M/B base may be slide out for individual assembly. Above the 7 slots, there are a hook. Raise the hook up to slide out the M/B base.<Fig.10>
  2. Fix the stand-off upon the marked positions<Fig.12 & 11> on the M/B base, load the M/B and fasten with screws.

Advantage 6:

  1. No components go across the up of M/B base, assemblers have free space to work! Any changes for CPU layout location or the height of add-on cards in the future won't cause compatible problem at all.
  2. Power Supply disassembled is not necessary because it is located above/out of the M/B base. In addition, the slide-in/out M/B base is good for time-saving, cost reducing, upgrading purpose and individual burning test.

Advantage 7:
Co-existing for stand-off and brass-screw on the M/B base fixing thread to meet different requirements from customers.<Fig11 & 12>

Step 6:
To get more stable system assembly, there are 5 holes(a/b/c/d/e) left to fix screws as an option after the assembly is done.
Advantage 8:
Optional Function 1: <Fig 15>
Better Ventilation for System: Besides the cooling fan coming with the Power Supply, there are 2 spaces for 8cm Fans (please see diagram Fan 1 & Fan 2) located behind the front plate (quite close to the bottom) and one 6cm fan<Fan.3> on the rear plate. The attention on the Fan 1 is focus on cooling the HDD (heater) itself. The availability of the 3rd cooling fan space is an advantage to help the ventilation for high performance PC. While you install<Fan.1> to cool the system/HDD off, it also brings the cost-saving benefit since it's no need to install HDD cooler again.

Intrusion Detection Switch
Bottom View

Key-lock can be hidden behind the front panel






Advantage 9:
Optional Function 2 Intrusion Detection Switch (security sensor) <Fig.16 >may be installed on the front plate. Upon the front panel is removed, the sensor will alarm right away to announce interruption and to avoid unnoticed stealing. Security lock<Fig.17 & 18 > is also available in the bottom of the front panel to lock the metal body and front panel in case of no security sensor is installed.

Advantage 10:
Color types of screws for easy telling and time saving.<Fig.19 >
TK- 3000 Series Kit Using Instruction
Fig.1
 * The kit is used for fixing the stand-off on M/B base.
* It includes two main parts: sleeve & lever, as shown in fig 1.
Step.1
 1. Match the kit with the stand-off as shown direction.
2. Then move the matched kit to M/B base.
Fig.2
 * Stand-off, as shown in figure 2, is one of the parts to fix up motherboard. * The function of feet is for hooking upon the M/B base.
Step.2
1. Put one foot into the gap.
2. Rotate down.
3. Push lever forward until the other foot slide into the gap. Notice: Do not push lever too hard, otherwise stand-off will be damaged.
Fig.3
 * This is the position where stand-off or¡]brass screw¡^fix ed as shown in figure 3.
* Our design can be compatible with both stand-off & brass screw.
Step.3
 * Make sure feet are fixed stably in the gaps.