|
Fig.1
|
|
|
*
|
The
kit is used for fixing the stand-off on M/B base. |
|
*
|
It
includes two main parts: sleeve & lever, as shown
in fig 1. |
|
Step.1
|
 |
|
1.
|
Match
the kit with the stand-off as shown direction. |
|
2.
|
Then
move the matched kit to M/B base. |
|
|
Fig.2
|
 |
| * |
Stand-off,
as shown in figure 2, is one of the parts to fix up
motherboard. |
| * |
The
function of feet is for hooking upon the M/B base.
|
|
Step.2
|
 |
|
1.
|
Put
one foot into the gap. |
|
2.
|
Rotate
down. |
|
3.
|
Push
lever forward until the other foot slide into the gap. |
|
Notice:Do
not push lever too hard, otherwise stand-off will be
damaged. |
|
|
Fig.3
|
 |
| * |
This
is the position where stand-off or (brass screw) fixed
as shown in figure 3. |
| * |
Our
design can be compatible with both stand-off &
brass screw.
|
|
Step.3
|
 |
|
*
|
Make
sure feet are fixed stably in the gaps. |
|
